Years ago I accidentally ordered a side of bridle leather that was way thicker than anything I needed it for. I cut a belt strap off it and punched a single hole to my size. I've been wearing that belt for 6 years now and it still only has the one hole. It's sick.
This is a heavyweight leather belt cut from a premium bridle leather. It's 13-14oz thick and will hold up for years and years. Far longer than anything you can get in a store and as long as any other belt I've seen out there.
Featuring:
- Standard 1.5" belt width
- Beveled and burnished edges (duh)
- Sold brass buckle
- Skived buckle end to minimize bulk
Sizing:
DO NOT SEND YOUR JEAN SIZE FOR THE BELT!!
Measure using an existing belt from the end of the buckle hardware to the hole that you most frequently use. To be clear, if you lay out a belt with the buckle to the left, measure from the left-most part of the buckle up to the hole you use. Again, do not use your jean size. If this is unclear please refer to the last picture of the listing.
I will punch 5 holes in the belt. One at the measurement you give, and two on either side of that hole unless otherwise specified.
As an example, I wear a 30 or 32 size jean and my belt size is 35.
Belt returns will not be accepted due to incorrect measurements.